Run A Barcode Demo Test; Hidden Menus - Printronix SL4M Quick Setup Manual

Run A Barcode Demo Test

Before you send an actual print job, run a bar code demo test:
1. Set the printer power switch to | (On).
2. When ONLINE or OFFLINE displays on the printer's LCD,
3. Press the Down and
4. Press the Right key until
5. Press
6. Press the Right key until Barcode Demo displays.
7. Press
8. If desired, you can run additional printer tests, such as Grey,
9. If you encounter print quality problems, refer to "Printhead

Hidden Menus

By default, menu items for advanced users are hidden (they do not
appear in the menu structure). To display these hidden menus, set
Admin User to Enable (in the
Run The Printer Setup Wizard
Run the Printer Setup Wizard (located on the CD-ROM) to install
the printer drivers and to configure the printer.
press to enter Menu mode.
↵
keys at the same time until THE
IS UNLOCKED displays.
↵
to enter the
Tests submenu is selected.
↵
. The printer will go online, and the Barcode Demo test
pattern will start and print two bar codes.
Grid, and Checkerboard. See step 2 above to start other tests.
Adjustments" in the User's Manual (located on the CD-ROM
included with this book).
DIAGNOSTICS displays.
DIAGNOSTICS menu. The Printer
PRINTER SETUP menu).
Control Panel
↵
KEY
17