Lithium Battery Warning; Trademark Acknowledgements - Printronix SL4M Quick Setup Manual

Rfid smart label and thermal printers

Hide thumbs Also See for SL4M:

Table of Contents

Taiwan

Lithium Battery Warning

If you have the optional real-time clock, then the controller board contains a lithium battery sealed inside the

real-time clock chip. Do not disassemble the chip to replace the battery. Do not dispose of the chip by

incineration. Failure to comply may cause the battery to explode. Contact your local waste agency for the

correct disposal procedure.

Printronix makes no representations or warranties of any kind regarding this material, including, but not limited

to, implied warranties of merchantability and fitness for a particular purpose. Printronix shall not be held

responsible for errors contained herein or any omissions from this material or for any damages, whether

direct, indirect, incidental or consequential, in connection with the furnishing, distribution, performance or use

of this material. The information in this manual is subject to change without notice.

This document contains proprietary information protected by copyright. No part of this document may be

reproduced, copied, translated or incorporated in any other material in any form or by any means, whether

manual, graphic, electronic, mechanical or otherwise, without the prior written consent of Printronix.

Printronix is a registered trademark of Printronix, Inc.

SL4M and T4M are trademarks of Printronix, Inc.

Table of Contents

Show Quick Links

Table of Contents

T4m