Table of Contents
Advertisement
Figure 38. Removing the microprocessor
9. Ensure that the small handle is in the raised position and the microprocessor retainer is fully open.
10. Remove the protective cover that protects the gold contacts of the new microprocessor.
11. Note the orientation of the new microprocessor. Hold the new microprocessor by its edges and align
the notches
1
on it with the tabs
microprocessor straight down into the microprocessor socket.
Note: The small triangle
indicator. The new microprocessor is in the correct orientation when this indicator points to the beveled
corner
4
of the microprocessor socket.
Figure 39. Installing the microprocessor
12. Close the microprocessor retainer and lock it into position with the small handle to secure the new
microprocessor in the socket.
13. Reinstall the heat sink and fan assembly. See "Replacing the heat sink and fan assembly" on page 99.
14. Reconnect all cables that were disconnected from the system board.
102
Lenovo S510 Hardware Maintenance Manual
2
in the microprocessor socket. Then, carefully lower the new
3
on one corner of the new microprocessor is the microprocessor orientation
Advertisement
Table of Contents
