Pgl Error Handling Set Request; Network Setting Response - Printronix SL4M Reference Manual

PGL Error Handling Set Request

This feature is supported by PXML version 2.1 or higher.
To disable printing of the PGL error page, enter the following PXML command
to change the front panel setting for PGL error handling.
NOTE: Set this for every job or save the configuration so the setting does not
change.
<?xml version="1.0"?>
<pxml>
<setting>
<set name="pglErrorReport" value="host"\>
</setting>
</pxml>
'value' = (options) off, on, debugMode, fault, or host
Value options Description
off No error message prints or is sent to the host.
on An error message prints when an error occurs.
debug Mode The test file prints as text with the error message under
the command line which has the error.
fault The error message prints, "IGP/PGL Error" displays on
the front panel, and the printer stops printing. Clear the
error by pressing the ONLINE key before resuming
printer operation.
host Sends the error message to the host.

Network Setting Response

This is supported by PXML version 2.0 or higher.
More than one network connection may be present, such as embedded
(ENET), wireless embedded (WENET), external (XNET) and wireless
external (WXNET) options. This printer setting message is sent to a host to
obtain setting requests for type=network. Only the network connections
(ENET, WENET, XNET, WXNET) that are present in the system have
descriptions included in this message.
Printer name, location, and description are per stack. ENET and WENET
share the same stack and they share the same name, location and
description, called EMBEDDED properties. Also, XNET and WXNET share
the same stack, and are EXTERNAL properties. If the printer has both the
external and embedded NIC, then the user should try to set the same
properties for both EMBEDDED and EXTERNAL, since they share the same
physical printer.
Printer Setting
31