Rfid Setting Response; Rfid Set Request - Printronix SL4M Reference Manual

Chapter 2
Messaging

RFID Setting Response

NOTE: Not supported on P7000 printers.
This is supported by PXML version 2.0 or higher.
This printer setting message is sent to a host in a response to obtain setting
request for type=rfidSetting.
<?xml version="1.0"?>
<pxml>
<setting>
<rfidSetting>
</rfidSetting>
</setting>
</pxml>
All numbers are in decimal value.
Valid values for errorHandling include none, stop, and overstrike.

RFID Set Request

NOTE: Not supported on P7000 printers.
This is supported by PXML version 2.0 or higher. This is a host request to
change the RFID setup in the printer; it requires a password. An ack message
is sent back to show whether the request was successful or unsuccessful.
The user can ask for rfidSetting to see if the new requested values are in
effect. All the numbers are in decimal values.
NOTE: The TagName value must match one of the RFID options from the
34
<property name="readerEnable"
<property name="tagName"
<property name="EPCdataSize"
<property name="USRdataSize"
<property name="TIDdataSize"
<property name="RSVdataSize"
<property name="error Handling"
<property name="printerRetry"
<property name="readerRetry"
<property name="maxRetryError"
printer. This setting is case sensitive.
value="1"/>
value=""/>
value=""/>
value=""/>
value=""/>
value=""/>
value=""/>
value=""/>
value=""/>
value=""/>