Sl5000R/T5000R Menu Overview - Printronix P7000 User Manual

Chapter

SL5000r/T5000r Menu Overview

SL5000r/T5000r Menu Overview
QUICK
SETUP CONTROL
Set the basic RFID encoder
menus needed to setup and status
configure the reporting. This
printer. menu appears only
if an RFID encoder
is installed.
CALIBRATE
CONTROL CONTROL
Select the correct Select the desired
media sensing for Active IGP
the media type emulation, other
installed and emulations, and
perform media various printer
sensor calibration. operating
parameters.
SERIAL
PORT
Select various An optional port.
serial port related This menu displays
parameters. only if the CTHI
option is installed.
ETHERNET
PARAMS
An optional feature. An optional feature.
This menu appears This menu appears
only if an Ethernet only if a Wireless
Network Interface Option is installed.
Card is installed.
8
RFID VALIDATOR
Online validator
setup and status
reporting. This
menu appears only
if a validator is
installed.
SELECTED
PRINTER
EMULATIONS
Emulations
selected from the
PRINTER
CONTROL menu
appear here. These
emulations relate to
graphics
languages,
particular printers,
and optional host
interface protocols.
C/T PORT USB PORT
Selects various
USB port related
parameters.
WLAN WLAN
ADDRESS PARAMS
An optional feature.
This menu appears
only if a Wireless
Option is installed.
CONFIG.
CONTROL
Name, store, and Control various
retrieve up to eight parameters related
custom printer to print quality,
configurations. media, and ribbon.
DIAGNOSTICS
Select various Select various
printer tests, parallel port related
monitor and record parameters.
printer
performance.
ETHERNET
PORT
An optional feature. An optional feature.
This menu appears This menu appears
only if an Ethernet only if an Ethernet
Network Interface Network Interface
Card is installed. Card is installed.
KERBEROS
PARAMS
An optional feature.
This menu appears
only if a Symbol RF
Card is installed.
Press . . to select the next main menu.
.
Press ↓ or ↑ to move within each main menu.
MEDIA
CONTROL
PARALLEL
PORT
ETHERNET
ADDRESS