TOC
• Slowly remove the tape covering
the cartridge's print head, being
careful to avoid damaging the
barcode label on the underside of
the cartridge.
DO NOT TOUCH THE COPPER AREA!
• Insert the ink cartridges into the carrier, copper end first
and snap the cartridge cover in place. Insert the color
in the left holder, monochrome black in the right
cartridge holder.
Pull out and
lift up
• Close the Publisher's front cover.
Step 4: Connecting the USB 2.0 Cable
Connect the Publisher to your computer with the beige
USB 2.0 Cable.
Color
Hardware and Software Set-Up 11
INDEX
Black