Fitting And Adjusting A Camera - KERN OZM 902(UK) User Instructions

5.8 Fitting and adjusting a camera

(OZM 903, OZM 923)
You can connect special microscope cameras and reflex cameras to trinocular
devices in the OZM-9 series, so that you can digitally record images or sequences of
objects being observed.
The connection for this is on the top side of the microscope head (see figure
above).
When the trinocular toggle rod is pulled out, the beam path, which normally emits
on the righthand eyepiece, is diverted in the tube, so that it can be used for the
camera adapter connection.
This means that when the device is used in trinocular mode, you will see one image
in the left eyepiece and one on the reflex camera or monitor of the microscope
camera.
This means that the 3D effect is lost.
OZM-9_2-BA-e-1910 16