Charging Times - Chrysler PACIFICA HYBRID 2019 Manual

For the full procedure on how to charge your vehicle,
using AC Level 2 Charging, and further information
on the EVSE Charging Station, refer to your Owner's
Manual:
• U.S. residents visit: www.mopar.com/en-us/care/
owners-manual.html
• Canadian residents visit: www.owners.mopar.ca
It is recommended to turn the charger off before
removing the cord by pressing the "Stop" button.

Charging Times

Type of EVSE Estimated Charge Time
Level 1 (120V/15A) Approximately 14 hours
Level 2 (240V/30A) Approximately 2 hours
For further information, and applicable warnings and
cautions, please refer to the Owner's Manual at
www.mopar.com/en-us/care/owners-manual.html
(U.S. Residents) or www.owners.mopar.ca (Canadian
Residents).
V E H I C L E C H A R G E
I N D I C A T O R S
Instrument Cluster High
Voltage Battery Display
There is a battery display indicator located on the
instrument cluster. The battery display will display the
current state of charge for the high voltage battery;
with the percentage value located to the left of the
symbol.
High Voltage Battery Gauge
Instrument Panel State Of
Charge Indicator
In addition to the battery display your vehicle is
equipped with a visual state of charge indicator. The
state of charge indicator is made up of five lights that
are mounted to the top center of the instrument panel,
which will illuminate when the vehicle is plugged into
the EVSE.
State Of Charge Indicator (Located In The
Center Of The Instrument Panel)
The state of charge indicator represents the current
state of charge for the high voltage battery and if there
is a fault with the charging system. The state of charge
indicator illuminates quickly to provide the charging
system status to the vehicle operator. Each light rep-
resents the battery's current percentage of charge.