Optional Low Open Circuit Voltage (Ocv) Welding Modes - Miller XMT 450 MPa Owner's Manual

.
A complete Parts List is available at www.MillerWelds.com
9-4.

Optional Low Open Circuit Voltage (OCV) Welding Modes

Low OCV Operation
The unit can be optionally configured for low open circuit voltage (OCV) operation in Stick and Scratch Start TIG modes. When the unit is config-
ured for low OCV operation only a low sensing voltage (approximately 15 VDC) is present between the electrode and the workpiece prior to the
electrode touching the workpiece (See Section 6-3).
Notes
OM-255083 Page 47