Braun 3202 Instructions Manual page 23

Preparing the food for grating
Fruits and vegetables should be washed fi rst or peeled. Seeds and cores
should be removed. Cut off the crust from cheese. The food should be cut
small enough to fi t into the fi lling tube.
Speed selection
Select the setting 7–15.
Note: Hard food should be grated at higher speeds.
Grating
Turn on the motor.
Fill the prepared food into the fi lling tube and push it down with the pusher.
Caution: Always use the pusher. Never reach into the fi lling tube while
the motor is running!
Disassembling
Turn off the motor. Turn the cover counter-clockwise and remove it from the
food processor bowl. Then remove the fi ne grating disc from the food pro-
cessor bowl.
CLEANING
Always make sure to switch off the motor and unplug the appliance.
Clean the motor block with a damp cloth only.
Blades are sharp! Use caution when cleaning the blades.
•
Hand wash only. DO NOT WASH ANY PART OF THE UNIT IN THE
DISHWASHER!
•
To clean the lid, first remove the seal ring (23). Put the seal ring back in
place after cleaning. You can use the seal ring from both sides.
•
Color-intensive food such as carrots may leave stains on the plastic
parts; wipe them off with cooking oil before cleaning with water.
•
Do not use sharp objects for cleaning purposes.
•
Clean the blades and the inserts very carefully - they are very sharp! Take
hold of the knob only.
DO NOT SUBMERGE THE BASE UNIT OR CORD INTO
THIS MAY DAMAGE THE FOOD PROCESSOR.
WATER OR ANY OTHER LIQUID.
23