Braun 3202 Instructions Manual page 11

When inserting the blade onto the
chopper bowl (21), push it down until it
audibly snaps in place.
3. Put the lid onto the bowl matching
the arrow on the lid with the arrow on
the bowl (see fig C). Then turn the lid
clockwise guiding its nose into the
safety lock opening of the motor block
(1) until it audibly snaps in place.
Note: When attaching the lid of the chopper bowl (22), it must be provided
with the seal ring (23).
REMOVING THE WORKING BOWLS
1. Switch off the appliance.
2. Turn the lid counter-clockwise and lift it off. Then turn the bowl in the
«click» direction until the arrow on the bowl matches the arrow on the
motor block and lift off the bowl.
3. When removing the blade from a bowl, take hold of it by the knob and
pull it off. Caution: The blades are very sharp!
4. The blade comes with a protective cover. If not in use, store the blade
on the protective cover.
Note: If you continue turning the food processor bowl in the «click»
direction as far as it will go, beyond the stop position, you can lock the food
processor bowl on the motor part. In this position, however, you cannot
switch on the motor.
C
1
1
2
11