Remove The Upper Case; Disassemble The Lcd Module - Lenovo IdeaPad 5i Hardware Maintenance Manual

Screw specifications
M2.5 x L5.5

Remove the upper case

Make sure the following FRUs (CRUs) have been removed.
"Remove the lower case" on page 34
"Remove the battery pack" on page 35
"Remove the solid-state drive (SSD) module" on page 36
"Remove the Wi-Fi card" on page 37
"Remove the heat sink" on page 38
"Remove the fan" on page 39
"Remove the speakers" on page 40
"Remove the I/O board" on page 40
"Remove the fingerprint board with cable" on page 42
"Remove the system board and the I/O board cable" on page 43
"Remove the LCD module" on page 45
Go to https://support.lenovo.com/partslookup
part:
Upper case

Disassemble the LCD module

The LCD module as a whole is not an FRU. Instead, it contains FRUs as its components. Before
disassembling the LCD module, make sure it has been detached from the upper case.
Remove the hinge cover
Make sure the following FRU (or CRU) has been removed.
"Remove the LCD module" on page 45
Step 1. Remove the hinge cover.
Figure 27. Remove the hinge cover
Go to https://support.lenovo.com/partslookup
part:
46
Hardware Maintenance Manual
Number of screws
4
to look up the Lenovo part number of the following replacement
to look up the Lenovo part number of the following replacement