Lifting Requirements For Personnel - DANIEL 700 User Manual

MODEL 700 CONTROL VALVE
Prepare the control valve for use
November 2020
4.2

Lifting requirements for personnel

4.2.1 Safety precautions using appropriately rated lifting
slings
LIFTING HAZARD
The lifting instructions are for installation and removal of a Daniel control valve only and
do not address lifting the control valve while it is attached or bolted to piping.
Failure to follow these instructions may result in death, serious injury or equipment
damage.
•
•
•
•
30
28
www.Daniel.com
WARNING
Only personnel properly trained in the safe practices of rigging and lifting should lift
valves.
Prior to use, visually inspect the slings for any signs of abrasion or other damage. Refer
to the sling manufacturer for inspection procedures specific to the sling you are using.
Never attempt to lift the valve by wrapping slings around the visual indicator, position
indicator pilots, needle valves, accessories or tubing.
Never attempt to lift the valve using only one sling around the valve. Always use two
slings wrapped around each end of the body as shown below. Use a choker style sling
with a spreader bar.
User manual
P/N 3-9008-553
Daniel Series 700 Control Valve