Programming Your Remote; Direct Code Entry - Philips Home power SRP4519L/27 User Manual

Programming Your Remote

Your remote is designed to control multiple
audio/video devices. To use, you will need to
program the remote for your devices. There
are two different methods you can use to
program the remote, Direct Code Entry or
Auto Code Search.
• The Direct Code Entry method is the
recommended method, as it is the simplest
and quickest method in most cases.
• The Auto Code Search method searches
through all the codes in the remote to find
a code for your device.
NOTE: This remote comes preprogrammed for
boxes and LG devices. Press TV, B-RAY and
Roku
®
AUD for LG devices, and STRM for Roku boxes.
Direct Code Entry (Recommended)
Locate the Code List included
1.
with your remote. Find the
section for the type of device
you wish to control, (e.g., TV,
STRM, DVD, AUD, CBL, AUX).
Locate the brand of your device
and circle all the remote codes
for the brand.
2. Press and hold down the SETUP
button on the remote until the
red light on the remote control
turns on. Release the SETUP
button. The red light will
remain on.
NOTE: The red light will either
be a small light at the top of the
remote or the power ON/OFF
button.
3. Press and release the device
button on the remote for the
type of device you wish to
control, (e.g., TV, STRM, B-RAY,
AUD). The red light will blink
once and remain on.
NOTE: Any of the device buttons
on the remote can be programmed
to control any of your devices. For
example, you can use the AUD
device button on the remote to
6