Programming Your Remote; Direct Code Entry - Philips SRP3219G/27 User Manual

Programming Your Remote

Your remote is designed to control multiple
audio/video devices. To use, you will need to
program the remote for your devices. There
are two different methods you can use to
program the remote, Direct Code Entry or
Auto Code Search.
• The Direct Code Entry method is the
recommended method as it is the simplest
and quickest method in most cases.
• The Auto Code Search method searches
through all the codes in the remote to find a
code for your device.
NOTE: This remote comes preprogrammed for
boxes and Samsung TVs. Press TV for
Roku
®
Samsung TVs and STR for Roku boxes.
Direct Code Entry (Recommended)
1.
2. Press and hold down the SETUP
3. Press and release the device
Locate the Code List included
with your remote. Find the section
for the type of device you wish to
control, (for example TV, STR, AUD).
Locate the brand of your device
and circle all the remote codes for
the brand.
button on the remote until the red
light on the remote control turns
on. Release the SETUP button.
The red light will remain on.
NOTE: The red light will either be a
small light at the top of the remote
or the power ON/OFF button.
button on the remote for the type
of device you wish to control, (for
example TV, STR, AUD). The red
light will blink once and remain on.
NOTE: Any of the device buttons
on the remote can be programmed
to control any of your devices. For
example, you can use the aux device
button on the remote to control a
Satellite Receiver, Digital Converter
Box, Streaming Media Player or any
device category in the Code List.
6