Advertisement
5.
Clean the surface where the antenna will be
installed, ensuring it is free from debris and grease.
7.
Press firmly around the edges of the antenna to
ensure a watertight seal has been achieved.
6
6.
Pass the cables through the hole and remove the
self-adhesive backing from the 3M seal. Pass the
cables through the roof and position the antenna with
the embossed arrow facing the front of the vehicle
and the outside edge of the antenna aligning with the
marks added earlier.
!
Front of
vehicle
8.
From the inside of the vehicle, attach the clamp
and turn clockwise onto the thread protruding from
the bottom of the antenna. Continue to turn until
the clamp is compressing the seal underneath the
antenna.
9.
Once in position, use 1 x No.6 Screw to secure the
clamp in position.
10.
The Antenna is now installed and ready to be
connected to a suitable 4G/5G Router.
IMPORTANT - Ensure the position of the
antenna is central to your markings,
as once stuck down, the antenna is not
designed to be removed.
Please note:
SMA to TS9 Adaptors (included)
may need fitting depending on
your chosen Router Model.
Front of
vehicle
Advertisement
