Returns - KNF Labor N035.18 Operating Instruction

Returns

42
11 Returns
Preparing for return
1. Flush the pump with air for a few minutes (if necessary for
safety reasons: with inert gas) at atmospheric pressure to
free the pump head of dangerous or aggressive gases
(see Chapter 8.2.1 Flushing the pump [} 32]).
Please contact your KNF sales partner if the pump can-
not be flushed due to damage.
2. Remove the pump.
3. Clean the pump (see Chapter 8.2.2 Cleaning the pump
[} 32]).
4. Send the pump together with the completed Health and
Safety Clearance and Decontamination Form to KNF,
stating the nature of the transferred medium.
5. Pack the device securely to prevent further damage to the
product. If necessary, request original packaging for a fee.
Returns
KNF shall undertake to repair the pump only under the condi-
tion that the customer presents a certificate regarding the
medium that is pumped and the cleaning of the pump. In this
case too, old devices can be returned. Please follow the in-
structions at knf.com/repairs here.
Contact your KNF sales partner directly if you require addi-
tional support for your return service.
Translation of Original Operating Instruction, KNF 121228-121397 04/23
Diaphragm pump N035.18