Vortex ® Applications And Presets Guide; Introduction - Polycom Vortex EF2280 Applications

I
NTRODUCTION
®
Vortex Applications and Presets Guide
This manual describes useful application information and the factory presets of the
®
Vortex . The following is an overview of each section:
• Building Your System with Multiple Vortexes® outlines things you need to con-
sider as you build a system with mulitple Vortex units.
• Presets shows Factory Presets 0-6 in block diagram form and matrix settings.
These are meant to be used as examples. Vortex Factory Presets include the fol-
lowing:
• Factory Preset 0: D
Outputs A-D for room audio, codec, Phone Add, and/or program audio.
• Factory Preset 1: D
• Factory Preset 2: S
go to Room 1; Inputs 5-8, Output 5 to Room 2. Input/Output A-B and Input/
Output C-D for codec and Phone Add in each room.
• Factory Preset 3: R
• Factory Preset 4: 8 M
loudspeaker zone.
• Factory Preset 5: 8/Z
• Factory Preset 6: 4 M
loudspeaker zone.
• Factory Preset 7-12: R
• Factory Preset 13: P
are direct out) with Inputs 1-8 set to Mic level. Everything else is disabled.
• Factory Preset 14: P
are direct out) with Inputs 1-8 set to Line level. Everything else is disabled.
• Factory Preset 15 B
abled.
. Inputs 1-8 direct out; Inputs A-D mix minus to
EFAULT
, S . Default configuration with stereo.
EFAULT TEREO
. Vortex split between 2 rooms. Inputs 1-4, Output 1
PLIT
.
ESERVED
/Z . For applications with 8 microphones per
ICS ONE
, S . 8 mics/zone with stereo.
ONE TEREO
/Z . For applications with 4 microphones per
ICS ONE
for future use.
ESERVED
M . Passthrough mode (Inputs 1-8, A-D
ASSTHROUGH IC
L . Passthrough mode (Inputs 1-8, A-D
ASSTHROUGH INE
S . All crosspoints muted. Everything dis-
LANK LATE
2 Technical Support: (800) 932-2774
I
NTRODUCTION