Polycom Vortex EF2241 Application Note page 9

Using a modem with vortex devices
Hide thumbs Also See for Vortex EF2241:
Table of Contents

Advertisement

Check the U
M
SE
ODEM
modem has the proper parameters to establish a connection. Enter the
T
N
of the remote modem to call. The T
ELEPHONE
UMBER
long Conference Composer will wait before a connection is completed. This can
be set from 30 to 300 seconds in 1 second increments.
Make sure the far end modem is connected to a direct phone line.
The local modem must be able to start handshaking when the far
end picks up the call. If you need to dial an extension to reach the
phone line the modem is using, the local modem will not be able to
delay the handshaking past when the far end phone is initially
taken off hook.
Most modems we have tested will work properly with the default
I
NITIALIZATION
require one addition to the default string.
If the default T
handshake with the far end modem, raise the T
Next, click the S
ETTINGS
box. Enter the I
NITIALIZATION
S
settings. The Actiontec external modem did
TRING
is not long enough for the local modem to
IMEOUT
Tab and make sure that RTS button is clicked.
S
so that the local
TRING
knob selects how
IMEOUT
value.
IMEOUT
9

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Vortex EF2241 and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Vortex ef2280

Table of Contents