External Modems We Have Tested; Flow Control / Baud Rate - Polycom Vortex EF2241 Application Note

E M
XTERNAL ODEMS
Any modem will work as long as it can connect at 9600 bps. Below are the
modems we have verified that will connect and successfully Autoscan the remote
site.
• ActionTec External Fax/Voice 56k V.90
• 3Com (U.S. Robotics) Sportster 33.6
• 3Com (U.S. Robotics) Faxmodem 56k V.90
• 3Com (U.S. Robotics) Faxmodem 56k V.92
• Motorola VoiceSurfr 56k V.90
F C
LOW ONTROL
Make sure that the Vortex device has it's baud rate set to 9600 and it's flow
control set for Off. To view those settings, press the Home button on the front
panel so that Vortex System Settings is shown on the LCD display. Then, press
the Enter button and use either the Down or Up buttons to scroll through the
menu items until you see Flow Control. Press Enter and use the Down or Up
buttons to change the Flow Control of the unit. If you've changed Flow Control
to Off, press Enter in order to save the flow control setting to the non-volatile
memory of the unit.
Press the DOWN button to change the Baud Rate of the unit. If you've changed
the Baud Rate to 9600, press Enter in order to save the Baud Rate setting to the
non-volatile memory of the unit.
W H
E AVE
/ B R
AUD ATE
T :
ESTED
5