Polycom Vortex EF2241 Application Note page 15

S41=000 S42=000
LAST DIALED #:
OK
F00PRESETL16,MGATE1,*,000000001100000000
ERROR
AATTII44
U.S. Robotics 56K FAX EXT Settings...
B0 E1 F1
BAUD=9600
DIAL=TONE
&A3 &B1
&M4 &N0 &P0
S00=002 S01=000 S02=043 S03=013 S04=010 S05=008 S06=004
S07=060 S08=002 S09=006 S10=014 S11=070 S12=050 S13=000
S15=000 S16=000 S18=000 S19=000 S21=010 S22=017 S23=019
S25=005 S27=000 S28=008 S29=020 S30=000 S31=128 S32=002
S33=000 S34=000 S35=000 S36=014 S38=000 S39=000 S40=001
S41=000 S42=000
LAST DIALED #:
OK
At this point, all commands echoed from the Vortex are echoed back into its
receive buffers. This causes an infinite loop to be created as the Vortex keeps
sending the same information over and over. This is not good!
Here are the firmware The system code that each EF Device needs to properly
function versions we have tested and confirmed the bug with:
• Sportster 33.6 V5.6.1
• Faxmodem 56k V.90 V5.2.9
• Faxmodem 56k V.92 V5.2.9
M1 Q0 V1
PARITY=N WORDLEN=8
ON HOOK CID=0
&C1 &D0 &G0
&R2 &S0
X4 Y0
&H1 &I2 &K3
&T5 &U0 &Y1
15