Auxiliary Function Selection - Beko 51232CSPTY User Manual

Indicative values for Synthetics programmes (EN)
Synthetics 60
Synthetics 40
* You can see the washing time of the programme you have selected on the display of the machine. It is normal that small
differences may occur between the time shown on the display and the real washing time.
** Remaining moisture content values may differ according to the selected spin speed.

4.10 Auxiliary function selection

Select the desired auxiliary functions before starting
the programme. Furthermore, you may also select or
cancel auxiliary functions that are suitable to the running
programme without pressing the Start / Pause button when
the machine is operating. For this, the machine must be in
a step before the auxiliary function you are going to select
or cancel.
If the auxiliary function cannot be selected or canceled, light
of the relevant auxiliary function will blink 3 times to warn
the user.
C
Some functions cannot be selected together. If a
second auxiliary function conflicting with the first one
is selected before starting the machine, the function
selected first will be canceled and the second auxiliary
function selection will remain active. For example, if you
want to select Quick Wash after you have selected the
Prewash, Prewash will be canceled and Quick Wash
will remain active.
An auxiliary function that is not compatible with the
programme cannot be selected. (See "Programme and
consumption table")
Auxiliary Function buttons may vary according to the
model of the machine.
• Předpírka (Prewash)
A Prewash is only worthwhile for heavily soiled laundry. Not
using the Prewash will save energy, water, detergent and
time.
C
Prewash without detergent is recommended for tulle
and curtains.
• Rychlé praní (Quick Wash)
This function can be used in Cottons and Synthetics
programmes. It decreases the washing times and also the
number of rinsing steps for lightly soiled laundry.
C
When you select this function, load your machine
with half of the maximum laundry specified in the
programme table.
• Rinse Plus
This function enables the machine to make another rinsing
in addition to the one already made after the main wash.
Thus, the risk for sensitive skins (babies, allergic skins, etc.)
to be effected by the minimal detergent remnants on the
14 / EN
2.5 45 0.90
2.5 45 0.42
Remaining Moisture
Content (%) **
≤ 1000 rpm
01:50 45
01:40 45
laundry can be reduced.
• Anti-Creasing
This function creases the clothes lesser when they are being
washed. Drum movement is reduced and spinning speed is
limited to prevent creasing. In addition, washing is done with
a higher water level.
• Rinse Hold
If you are not going to unload your clothes immediately after
the programme completes, you may use rinse hold function
to keep your laundry in the final rinsing water in order to
prevent them from getting wrinkled when there is no water
in the machine. Press Start / Pause button after this process
if you want to drain the water without spinning your laundry.
Programme will resume and complete after draining the
water.
If you want to spin the laundry held in water, adjust the Spin
Speed and press Start / Pause button.
The programme resumes. Water is drained, laundry is spun
and the programme is completed.
• PET program (Pet hair removal)
This function helps to remove pet hair that remain on your
garments more effectively.
When you select this function, Prewash and Extra Rinse
steps are added to the normal programme. Thus, washing
is performed with more water (30%) and the pet hair is
removed more effectively.
A
Never wash your pets in the washing machine.
Delayed Start
With the Delayed Start function the startup of the
programme may be delayed up to 19 hours. Delayed start
time can be increased by increments of 1 hour.
C
Do not use liquid detergents when you set Delayed
Start! There is the risk of staining of the clothes.
Open the loading door, place the laundry and put detergent,
etc. Select the washing programme, temperature, spin
speed and, if required, the auxiliary functions. Set the
desired time by pressing the Delayed Start button. Press
Start / Pause button. The delayed start time you have set is
displayed. Delayed start countdown starts. "_" symbol next
to the delayed start time moves up and down on the display.
Remaining Moisture
Content (%) **
> 1000 rpm
40
40
Washing Machine / User's Manual