URBAN OUTFITTERS MARGOT SQUARE MIRROR Assembly Instructions

MARGOT SQUARE MIRROR
Assembly Instructions
TOOLS REQUIRED BUT NOT INCUDED:
Screwdriver, Drill, Hammer, Level, Pencil

WARNINGS:

Do not throw away packing materials and carton until after assembly.
Assemble all parts on a clean smooth surface

CARE INSTRUCTIONS:

Avoid direct exposure to sunlight. Do not place overheat or air
conditioning vents. Adjust levelers so that the furniture sits flat on uneven
floors. Blot spills do not rub, with a clean white cloth.
Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden area.
You may need to re-tighten all bolts after initial use.

PARTS INCLUDED:

A) Square Mirror
[15.9 x3.9 x H22"] x1
or
[40.5 x 10x H56 cm ] x1
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.© 2017 UO, Inc.
All rights reserved, including all applicable copyright, design and patent rights. Any unauthorized
reproduction, adaptation, distribution or other infringement will be prosecuted.
B) Z hook
[0.4 x 0.98 x 0.16"] x2
or
[1 x 2.5 x 0.4 cm] x2
C) Screw
[D 0.35 / 0.19 x 2.32"] x2
or
[D 8.9/4.8 x 59 mm] x2
D) Plastic Anchor
[D 0.35 " x 1.4" Bolt] x2
or
[D 9 x 36 mm] x2
Page 1 of 3