URBAN OUTFITTERS 68967801 Assembly Instructions

LEANING STORAGE SHELF
Assembly Instructions
TOOLS REQUIRED BUT NOT INCUDED:
EX. 'Phillips head screwdriver, Level, Hammer' (do not include graphic)
Do not throw away packing materials and carton until after assembly.
Assemble all parts on a clean smooth surface

CARE INSTRUCTIONS:

Avoid direct exposure to sunlight. Do not place over heat or air conditioning vents.
Adjust levelers so that the furniture sits flat on uneven floors.
Blot spills do not rub, with a clean white cloth.
Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden area.
You may need to re-tighten all bolts after initial use.

PARTS INCLUDED:

1) Top Shelf x1
(Wrapped in green tape)
A) Allen Bolt
[8mm x 30mm] x8
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Anyunauthorizedreproduction, adaptation, distribution orother infringementwill be prosecuted.
2) Bottom Shelf x1
(Wrapped in green tape)
B) Washer
[17mm] x8
3) Leg x2
(Wrapped in green tape)
C) Allen Key
[4mm] x1
Page 1 of 5