Connection Cable ACI3-J2 REVISION OVERVIEW Revision Date Description Author 13.04.2023 First Release A. Zimmermann Table 1: Document Revision Table Operating Instruction – ACI3-J2 – Connection Cable – Rev. - Page 3 of 21 EXPORT CODE C COMMERCIAL. RESTRICTED TO EMBARGOED COUNTRIES AND DENIED PARTIES. PRINTED COPIES ARE NOT MAINTAINED TO LATEST REVISION.
Connection Cable ACI3-J2 TABLE OF CONTENTS Imprint ......................2 Revision Overview ..................3 Table of Contents ................... 4 Declaration of Conformity ................5 Information about the Document ..............6 Intended Use ....................7 Overview and Description ................8 Connector Dimensions ACI3-E2 & ACI3-T2 ............9 General Data of Equipment Plug &...
The Tethered lead Charging Cable is in conformity with the relevant harmonization legislation. EU-DECLARATION OF CONFORMITY and UK-DECLARATION OF CONFORMITY are available on request and could be downloaded from ITT Cannon homepage: ittcannon.com/evc Operating Instruction – ACI3-J2 – Connection Cable – Rev. -...
Connection Cable ACI3-J2 INFORMATION ABOUT THE DOCUMENT This document contains important information about transportation, assembly (function), operation, and maintenance of the Connection Cable. CAUTION! Non-adherence to the information contained in this document may re- sult in injury or property damage! Always observe and comply with the warning and safety no- tices in this document.
Connection Cable ACI3-J2 INTENDED USE The Connection Cable described herein is a cord set, with connectors on both ends, to connect an electric vehicle to an EV charging infrastructure consisting of: Equipment Plug Vehicle Connector ACI3-E2 (Type 2 acc. to IEC 62196-2) - ACI3-T2 (Type 2 acc.
Connection Cable ACI3-J2 OVERVIEW AND DESCRIPTION The Connection Cable consists of the following individual components which - within the overall scope of functioning - represent the interface between the charg- ing infrastructure and the vehicle being charged: Equipment Plug - ACI3-E2 Type 2 •...
Connection Cable ACI3-J2 GENERAL DATA OF EQUIPMENT PLUG & VEHICLE CONNECTOR Description Value DIN EN 62196-1:2015 Applied standard DIN EN 62196-2:2017 Charging mode Mode 2 & 3B (IEC 61851:2017) Max. operating temperature +40 °C Min. operating temperature -30 °C Max. operating voltage, depending on Type 250 V-AC, 480 V-AC Rated current, depending on Type 20 A, 32 A, 63 A...
Connection Cable ACI3-J2 CONNECTOR MARKING The type marking is located on the bottom side of the housing. Graphical expression for identification of vehicles and infrastructures compatibility for consumer information on EV power supply is located on top of Equipment Plug and Vehicle Connectors For Vehicle Connector For Equipment Plug...
Connection Cable ACI3-J2 TRANSPORTATION AND STORAGE DELIVERY INFORMATION! Always observe the pictograms on the transport packaging displaying cargo handling information! The type of packaging may vary depending on the component, weight, and selected shipping method Only store the components in dry, enclosed rooms while ob- serving the pictograms on the packaging.
Connection Cable ACI3-J2 TRANSPORTATION General information: Always observe applicable local safety and accident prevention regula- • tions. • Specify transportation routes in advance and remove possible obstruc- tions. Keep unauthorized persons away from the transportation route and as- • sembly or installation location. Secure affected areas against access by un- authorized persons.
Connection Cable ACI3-J2 CONNECTOR OPERATION The 2-end Connection Cable is used to connect the electric vehicle and the charging station. 1. The Vehicle Connector must be plugged into the charging inlet (vehicle) and the Equipment Plug into the charging outlet (station). 2.
Page 15
Connection Cable ACI3-J2 DANGER! Danger of death due to electric shock! Injuries due to an electric shock and/or burns are possible and may cause immediate death. • Always check the Connection Cable and contacts for damage and contamination before use. •...
Page 16
Connection Cable ACI3-J2 CAUTION! Misuse of the Connection Cable can lead to interruption of charging, disruption of service or even injuries: Never use high force to plug and unplug the Vehicle • Connector or Equipment Plug. Don’t stress the charging connector with mechanical •...
Connection Cable ACI3-J2 DANGER! Danger of death due to electric shock! Modifications (of any kind) to components of the Connec- tion Cable are strictly forbidden! In this case, injuries due to an electric shock and/or burns are possible and may cause immediate death. Repair of the product is not possible.
Page 18
Connection Cable ACI3-J2 CAUTION! Insecure storage and transportation of the connection cable can lead to damages, or even injuries: Store and Transport cable in a secure position, espe- • cially during transport in a vehicle. Page 18 of 21 Operating Instruction – ACI3-J2 – Connection Cable – Rev. - EXPORT CODE C COMMERCIAL.
Connection Cable ACI3-J2 CLEANING THE COMPONENTS INFORMATION! Only clean the charging cable when it is not connected to the vehicle or the charging station. Use a dry cloth to clean outside of cable, Vehicle Connector, Equipment Plug and pin contacts. Never use abrasive cleaning agents, water jet or steam jet cleaners.
Need help?
Do you have a question about the CAS25128E-CU and is the answer not in the manual?
Questions and answers