Table of Contents
Advertisement
4. If you are connecting the PC directly to a KA-DV300 or KA-DV5000 Network Pack, remove the check
mark on the [Use a proxy server for your LAN] box if it is checked.
5. If you are connecting to a KA-DV300 or KA-DV5000 Network Pack using a LAN that requires a proxy
server, check on the [Use a proxy server for your LAN] box and type the address of the proxy server.
Check on the [Bypass proxy server for local addresses] box and click [Advanced...] button to open the
[Proxy Settings] dialog box.
6. Type the IP address of the camera in the blank area of the [Do not use proxy server for addresses
beginning with:]. window. You do not need to enter the entire address, just the first two numbers,
followed by '.*.*' as shown here Click the [OK] button after you have completed the proxy settings.
3.3 Uninstall Streamproducer
Note: Some operating systems will require you to log in with administrative privileges to uninstall software.
You can uninstall Streamproducer using one of the following two ways.
3.3.1
Using Streamproducer CD-ROM
Insert the Streamproducer CD-ROM in CD-ROM drive. If your computer is configured to autorun from
•
CD-ROM, the first setup screens appear. If these screens do not automatically appear, from the
Windows "Start" menu, select "Run" and run 'Startup.exe' from the CD drive.
Choose [English] as the language and click on [Install the Streamproducer].
•
Since the installation program will find an instance of Streamproducer already installed, you will be
•
prompted if you would like to remove it. Click 'OK' to remove Streamproducer.
3.3.2
Using "Add/Remove Programs"
From the Widows desktop, open 'My Computer'. Open 'Control Panel' and choose [Add/Remove
•
Programs].
Click [Streamproducer] on the list of Currently installed Programs and click [Remove] button.. A
•
message for confirmation of removing Streamproducer appears.
Click [OK] to remove Streamproducer.
•
8
4
4
.
.
R
R
u
u
n
n
n
n
i
i
n
n
g
g
S
S
t
t
r
r
e
e
a
a
m
m
p
p
r
r
o
o
d
d
u
u
c
c
e
e
r
r
From the Windows [Start] menu, choose [Programs], [JVC], [Streamproducer]. The main window, shown here,
appears.
Video
display
windows
The Streamproducer desktop has three areas; one for each function:
[Video display windows] These four windows can display saved contents from files or images from
cameras. Four windows can be shown maximally. See Section 6.2 "Option Dialog" for information
about setting of the number of the Video display windows. Until a file is selected or a camera is
connected, the video display window will be blank.
[Casting monitor window] This window shows a preview of the video casting image.
[System condition window] This window, with three specific function tabs, shows information about
the system condition and casting. See Section 0 for information about the information presented in
these windows.
4.1 Closing Streamproducer
Choose [Exit] from [File] menu of Streamproducer to close, or click on the X icon on the upper right hand corner.
If you have not already disconnected from any connected cameras, you will be prompted to disconnect now
and close Streamproducer.
Casting
monitor
window
System
condition
window
9
Advertisement
Chapters
Table of Contents
Troubleshooting
