Option Dialog - JVC KA-DV5000 Startup Manual

The following information is available by clicking on the 'Connections' tab.
Internet URL
Shows the internet URL that users who want to receive the cast
video must use for Windows Media Player.
For details on the process of receiving the casting image, Refer to
Section 5 Receiving the video stream".
More than one URL will be listed if you one interface connected to a
camera and another interface for the Internet, or have multiple
connections to the Internet. Use the URL of the interface not
connected to the camera, unless only one interface is used to
connect to both the camera and the internet through a switch.
LAN URL
W\hen connecting via a local LAN, you can use this LAN name
instead of the Internet URL for viewing eh video stream with
Windows Media Player.
Copy Internet URL
This button is a shortcut for copying the Internet URL so that you can paste it into the address bar of another
application, such as Windows Media Player.
Copy LAN URL
This button is a shortcut for copying the LAN URL so that you can paste it into the address bar of another
application, such as Windows Media Player.
Clients
This window shows the IP address of any client connected to and streaming from Streamproducer.
22

6.2 Option dialog

Options, such as selecting the folder for saving video streams, casting ports and the number of video windows
can be selected by choosing [Option...] from the [Tool] pull-down menu of Streamproducer.
Capturing Folder
You can specify the disk drive and folder to save recorded images. A subfolder is automatically created under
the specified folder according to the connected camera name, and the video clips are stored in this subfolder.
For this reason, we recommend that each connected camera be given a unique name.
You can type in a folder path directly, or you can click the [Browse...] button to search for an appropriate drive
and folder.
HTTP Port
This field allows you to specify the HTTP port number for casting. An unused port number can be found by
clicking the [Find Free Port] button. You can only set this parameter when not connected to any camera or file.
Maximum Clients
The number of clients that can connect to Streamproducer at the same time. The maximum is 10. You can only
set this parameter when not connected to any camera or file.
Capture casting contents simultaneously
Checking this box captures the cast video stream to a file. This option must be enabled before casting begins.
You can only set this parameter when not connected to any camera or file.
Video Window
If you are only connecting to one or two cameras, you can use this field to change the number of Video display
windows. You can only set this parameter when not connected to any camera or file.
23