Error Codes - VALBERG 14S40 B XAD929C Instructions For Use Manual

C
Useful information

Error codes

If there is a malfunction the dishwasher will display an error code. The following table shows
possible error codes and their causes.
Codes Meanings
E1 Longer inlet time.
Not reaching required
E3
temperature.
E4 Overflow.
Failure of orientation of
E8
distributary valve.
E9 Touch button adhesion
EC Washing control system fail.
Failure of communication
Ed between main circuit board with
display circuit board.
WARNING
• If overflow occurs, turn off the main water supply before
calling a service.
• If there is water in the base pan because of an overfill or
small leak, the water should be removed before restarting
the dishwasher.
• If there is an error code that cannot be solved, please
request professional assistance.
56
Possible causes
Faucets is not opened, or water
intake is restricted,or water
pressure is too low.
Malfunction of heating element.
Some element of dishwasher leaks.
Open circuit or break of distributary
valve.
Water or other material in the key
area.
PCB or motor fail.
Open circuit or break wiring for the
communication.
EN
Notes
57 EN