Error Codes - VALBERG FBI 16S43 A XAD929C Instructions For Use Manual

C
Useful information

Error codes

If there is a malfunction the dishwasher will display an error code. The following table shows
possible error codes and their causes.
Codes Meaning
E1
Longer inlet time.
Not reaching required
E3
temperature.
E4
Overflow.
Failure of the washing control
Ec
system.
L4
Motor failure.
Failure of communication
Ed
between main circuit board with
display circuit board.
WARNING
• If overflow occurs, turn off the main water supply before
calling a service.
• If there is water in the base pan because of an overfill or
small leak, the water should be removed before restarting
the dishwasher.
• If there is an error code that cannot be solved, please
request professional assistance.
52
Possible causes
Faucets is not opened, or water
intake is restricted,or water
pressure is too low.
Malfunction of heating element.
Some element of dishwasher leaks.
Defective PCB, drain pump or motor
failure.
Motor failure.
Open circuit or break wiring for the
communication.
EN
Notes
53 EN