Installing And Connecting To The Network - Polycom SoundStation IP 4000 Quick Start Manual

Installation

Installing and Connecting to the Network

To install the SoundStation IP
4000 and connect it to the network,
complete the following steps:
Place the SoundStation IP 4000 on
1
a flat surface (such as a conference
room table or desktop), with a
power outlet and a data network
port nearby.
Connect one end of the 6 ft. data
2
cable to your data network port.
Connect the other end to the
network (LAN) port on the Power
Interface Module.
®
SoundStation IP 4000 Quick Start Guide
Connect the 25 ft. data cable to the
3
RJ-45 port on the bottom of the
SoundStation IP. (The other end of
this cable is pre-plugged into the
PIM.)
Connect the power adapter to the
4
AC adapter port on the PIM.
Plug the other end into a standard
5
electrical power outlet in the wall.