Programming The Transmitter; Disposal - Becker Centronic VarioControl VC421-II Assembly And Operating Instructions Manual

Programming the transmitter

Caution
•
Risk of injury due to electric shock.
• Connection may only be performed by a qualified electri-
cian!
•
The device only offers back-of-hand protection, not
touch protection.
•
Only operate the programming button with an insulated
tool.
•
Always take into account the device switching current.
Before programming the flush-mounted radio transmitter, a
master transmitter and the limit positions must be pro-
grammed.
Refer to the receiver's instructions.
Programming the flush-mounted radio transmitter
Press the programming button on the master transmitter until the receiver
confirms.
Then press the programming button on the new flush-mounted radio transmit-
ter until the receiver confirms.
Now press the programming button on the new flush-mounted radio transmit-
ter you wish to program again.
► The receiver confirms successful programming.
The crossed-out bin symbol on the product indicates that the device is subject
to mandatory disposal separate from household waste. This product must be
handed over to a collection point for electrical and electronic equipment at the
end of its service life.
The packaging material must be disposed of properly.

Disposal

19 - en