Table of Contents
Advertisement
21. NFC Function
21. NFC Function
Use the smart phone with NFC function to read and write all the setting data of the wired remote controller.
When using NFC, you should make this setting enabled. The default setting is "Enable".
NOTES:
•
NFC is the abbreviation of "Near field communication".
•
NFC function is supported on the smartphone listed below.
*1
iPhone
Model: iPhone7 or newer, OS: please refer to the operation manual of airCloud Tap.
*2
Andriod
Model: Smartphone with NFC function
*1: Apple and iPhone are trademarks of Apple Inc. registered in the U.S. and other countries and regions. iOS
is a trademark or registered trademark of Cisco in the United States and other countries and is used under
license.
*2: Andriod is a trademark registered by Google LLC.
*3: Some Android smartphone models cannot be supported. Please refer to the App operation manual for
details.
•
NFC can improve service and installation. If the wired remote controller may be accessible to unauthorized
third-party, please set the NFC to "Disable".
•
Please refer to the App operation manual for how to use the application.
1. Download App
To download the "airCloud Tap" application, search for it on the "App Store®"
Alternatively, you can scan the code provided below with your smartphone to directly access the application.
*1: App Store® is a service mark of Apple Inc.
*2: Google Play and the Google Play logo are trademarks of Google LLC.
NOTE:
An internet connection is required to download, update, or use airCloud Tap (user registration, etc.).
Customers are responsible for internet communication costs.
2. Set NFC
Step1. Select "Service Menu" on the Service & Installation screen
and press "OK".
Step2. Select "NFC setting" and press "OK".
Step3. Press " " or " " to select "Enable".
Step4. Press "OK" to confirm the setting.
Step5. Press " "to return to Step 2.
3. Read and Write Settings
NFC communication can only be performed when the specific screen for it is displayed on the remote control.
Please make sure to display the "NFC communication screen" before attempting to read or write settings.
Please bring the NFC receiver of the smartphone closer to the NFC receiver of the remote control.
NOTES:
•
When using an iPhone, NFC is located on the top of the smartphone.
•
The location of the NFC depends on the smartphone. Please check the operation manual of your
smartphone.
•
For NFC operation on smartphone, please refer to the operation manual of airCloud Tap.
35
*3
, OS: please refer to the operation manual of airCloud Tap.
Available
ANDRIOD APP
*1
*2
or "Google Play"
.
NFC Setting
Enable
Disable
OK
Select
A16381TMEL
Back
Advertisement
Table of Contents
