WH63 BASE STATUS LEDS
The following LED indicators appear on the base of the WH63 headset.
Off
Glows white
Glows green
Fast green flash
Green double flash
CALL HANDLING FROM THE HEADSET
When using MaX UC, all call control must be done from the MaX UC application and not from the headset or
IMPORTANT:
base.
+
Answer a Call: Press the Call Control button or undock the headset.
NOTE:
Auto Answer must be turned on to answer the call by undocking the headset.
+
End a Call: Press the Call Control button or dock the headset.
+
Reject a Call: Double-press the Call Control button.
+
Hold a Call: Hold the Call Control button for two seconds.
Resume Held Call: Hold the Call Control button for two seconds.
+
+
Adjust the Volume: Press the Volume Control button up/down.
PC DESK PHONE BUTTON
Mute Button
Call Control Button
Volume Up/Down Button
Need support? Connect with us at
Dial
4357 (HELP)
PC/desk phone device is not connected.
PC/desk phone device is connected and in the idle state.
In a call.
Ringing.
Call is on hold.
www.northland.net/support
or
315-671-6262
to speak to a Northland Representative
4
or