Product Introduction; Names Of Main Parts - Gree GMV-144WM/B-U Owner's Manual

(23) Make sure the unit can be earthed properly and soundly after plugging into the socket so as to avoid
electric shock. Please do not connect the ground wire to gas pipe, water pipe, lightning rod or telephone
line.
(24) Electrify the unit 8 hours before operation. Please switch on for 8 hours before operation. Do not cut off
the power when 24 hours short-time halting (to protect the compressor).
(25) If refrigerant leakage happens during installation, please ventilate immediately. Poisonous gas will
emerge if the refrigerant gas meets fire.
(26) Volatile liquid, such as diluent or gas will damage the unit appearance. Only use soft cloth with a little
neutral detergent to clean the outer casing of unit.
(27) If anything abnormal happens (such as burning smell), please power off the unit and cut off the m ain
power supply, and then immediately contact Gree appointed service center. If abnormality keeps going,
the unit might be damaged and lead to electric shock or fire.
GREE will not assume responsibility of personal injury or equipment damage caused by
improper installation and commission, unnecessary service and incapable of following the rules
and instructions listed in this manual.

2 Product Introduction

Gree Multi VRF Modular System adopts inverter compressor technology. According to
change the displacement of compressor, stepless capacity regulation within range of
10%-100% can be realized. Various product lineup is provided with capacity range from
72kBtu/h to 360kBtu/h, which can be widely used in working area and especially applicable to
the place with variable load change. Gree air conditioner is absolutely your best choice.

2.1 Names of Main Parts

①
NO.
Name Fan, Motor
Fig.2.1
②
Electric Box
Valve interface
Assembly
2
GMV DC Inverter VRF
③ ④
Power cord
through-hole
⑤
Communication
code through-hole