Table of Contents
Advertisement
4.
To remove a memory module, press outward on the two latches on each side of the memory module (1),
then pull the memory module out of the slot (2).
5.
Slide the new memory module into the slot at approximately a 30° angle (1), then press the memory
module down (2) so that the latches lock it in place.
NOTE:
A memory module can be installed in only one way. Match the notch on the module with the tab
on the memory slot.
6.
Reinstall the EMI shield onto the system board.
If your computer model is a ProOne 600, place the EMI shield onto the chassis and press it into
●
place.
Removing and installing memory
33
Advertisement
Table of Contents
