Position Rops - Gravely Pro-Turn 400 Series Operator's Manual

Test Steering PTO Parking
Levers
Starting Interlock
1 Neutral Off
2 Forward, On
Neutral,
Reverse
3 Forward, On
Neutral, or
Reverse Off
Operating Interlock (Engine On)
4 * Forward, On
Neutral,
Reverse
5 * Forward, On
Neutral, or
Reverse Off
* When operator lifts off seat.

POSITION ROPS

IMPORTANT: Inspect ROPS and seatbelt for
damage and loose or missing hardware.
Raise Center Bar
See Figure 19.
1. Remove hairpins from lock pins and
remove lock pins from hinge plate.
2. Raise center bar and secure with lock
pins and hairpins.
WARNING: AVOID INJURY.
Seatbelt MUST be worn when
operating with center bar raised.
Figure 19
Result
Brake
Engaged Engine
starts.
Engaged or Engine
Disengaged does not
start.
Disengaged Engine
does not
start.
Engaged or Engine
Disengaged shuts off.
Disengaged Engine
shuts off.
Lower Center Bar
See Figure 20.
WARNING: AVOID INJURY.
Lower the center bar only when
needed to drive under an object.
There is no rollover protection
with the center bar in the
lowered position. DO NOT wear
seatbelt when ROPS is in
lowered position.
1. Remove hairpins from lock pins and
remove lock pins from hinge plate.
2. Lower center bar and secure with lock
pins and hairpins.
IMPORTANT: Return center bar to the raised
position when clear of obstacles.
EN - 19
Lowered Position With
Bagger Installed
Lowered Position With
No Bagger Installed
Figure 20