Mount The Px-755Sa Drive; Record The Serial Number; Mount The Drive In The Computer - Plextor PX-755SA Installation And User Manual

Section 2. Installing the PX-755SA Internal SATA Drive

Mount the PX-755SA Drive

Before proceeding to install the PX-755SA drive in your personal
computer, make sure you have all the cables you'll need.

Record the Serial Number

Note the serial number and TLA number of your drive, and record those
numbers.

Mount the Drive in the Computer

You can mount your internal drive in any available bay. You must
remove the small panel that covers the bay that you want to use.
NOTE: The drive can be mounted horizontally or vertically
If you don't have an empty bay, remove the existing DVD-ROM or CD-
ROM drive and install the PX-755SA.
You must make two cable connections to your PX-755SA. The two
cable connections that you must make are:
• SATA cable
• Power cable
To mount the PX-755SA drive:
1. Before proceeding, make sure the power to your computer and any
external peripherals is OFF and your computer is UNPLUGGED
from its power source.
2. Remove your computer's cover, following the directions provided by
your computer's manufacturer. Typically, this involves loosening or
removing several screws on the back panel of your computer and
sliding off the cover. See the illustration below for an example.
14
PX-755SA Installation and Users Manual