Plextor PX-740A Installation And User Manual page 39

11. Connect a digital audio cable if your sound board is equipped with
the Sony/Philips Digital Interface (SPDIF) or Digital-In, and you
wish to use the digital audio output from your PX-740A. This cable
runs from the digital audio output connector pins on the PX-740A
back panel to the sound board. (This cable is not supplied by
Plextor.)
12. Mount the PX-740A drive in the computer using the four screws that
were supplied with your drive. Use only these screws.
CAUTION: Do not mount your drive in your computer using screws other
than those supplied by Plextor. You may damage the drive if you insert
screws that are too long or the wrong thread type.
Section 2. Installing the PX-740A Internal ATAPI Drive
PX-740A Installation and Users Manual
33