Fanimation Kute FPD8534 Series Manual page 11

How to Wire Your Ceiling Fan (Continued)
BLACK
L
WHITE
N
AC
POWER
3.
Connect wires using connectors as shown in
Figure 4.
WARNING
Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors. Do not operate fan until the blades are in
place. Noise and motor damage could result.
YELLOW
RED
GRAY
BLACK
BLUE
BROWN
4. After connections have been made, put the white and green leads to one side and the black leads towards the
other side, the connection should be turned upward and carefully push leads into the outlet box. The wires
should be spread apart with the grounded conductor and the equipment-grounding conductor on one side of the
outlet box and the ungrounded conductor on the other side. (Figure 5)
WARNING
The blades must be installed first before programming
is performed.
HANGER
BRACKET
HANGER
BALL
RECEIVER
BLACK
ANTENNA
BLK-ANT
GREEN / YELLOW
Listed
- Ground wire (2)
Outlet Box
From Receiver
GREEN-
Ground wire
From Ceiling
GREEN-Ground Wire
WHITE
From Hanger Bracket
GREEN-Ground Wire
From Hanger Ball
BLUE
BROWN
GROUND
Figure 4
CAUTION: INCORRECT WIRE CONNECTION
COULD DAMAGE THIS RECEIVER.
RECEIVER HARDWARE USED:
Wire Connectors
Green Wire
from Supply
(Ground)
Green Wire
from Hanger
Bracket (Ground)
Green Wire
from Receiver (2)
(Ground)
Green Wire
from Hanger
Ball (Ground)
Figure 5
11
RED
GRAY
YELLOW
DC MOTOR
WHITE BLUE
LIGHT KIT
X 8
White Wire
Listed
from Supply
Outlet Box
White Wire
from Receiver
Black Wire
from Supply
Receiver
Black Wire
from Receiver
Household
Supply