Dukane 6000 Series User Manual page 26

Linear Vibration Welder 6000 Series
User's Manual
AC Disconnect Switch
The AC power cord is directly connected internally to the
AC disconnect switch. To turn the AC power OFF, twist
the red circular knob counterclockwise until it is pointing
left to the Green OFF position as shown in Figure 3-6.
To turn the AC power ON, twist the red knob clockwise
until it is pointing up as shown in Figure 3-7.
Disengaging Switch Coupling
To open the electrical cabinet, the CE-compliant
disconnect switch must be in the OFF position as shown
in Figure 3-6. First, unlock the door handle if it is locked.
Pull the door handle out and then twist it to the left. This
will release the door latch. To close the door, twist the
Figure 3-6
CE–Compliant Disconnect in OFF Position
door handle back to the right, and push the handle in to
latch the door securely.
Figure 3-7
CE–Compliant Disconnect in ON Position
Page 20
Dukane Manual Part No. 403-619-00