Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Plantronics Calisto 7200
Summary of Contents for Plantronics Calisto 7200
- Page 1 Calisto 7200 USB Speakerphone User Guide...
-
Page 2: Table Of Contents
Contents Overview Connect to PC Daily Use Power Volume Mute/Unmute Answer or End a call Low Battery Behavior Pair with a Bluetooth device Unpair a Bluetooth device Charge Switch between paired devices Clear stored Bluetooth devices Indicator lights explained Security cable Support... -
Page 3: Overview
Overview Power button Mute ® Bluetooth button Volume down Speaker Indicator light Volume up Microphones Handset Micro USB port... -
Page 4: Connect To Pc
Connect to PC Connect the speakerphone to your computer using a micro USB cable and use the speakerphone to play music or call audio. Connect the USB cable from the USB port on the speakerphone to the USB port on your computer. Set the speakerphone as your default audio device in your computer's system settings. -
Page 5: Daily Use
Daily Use Power When the device boots up, the Status Indicator will illuminate solid white for 2-3 seconds to complete boot-up. Then power-on tone will play, volume buttons illuminate and Status Indicator will turn off, signifying that the device is ready to use. Give the power button a short press to power on the device. -
Page 6: Pair With A Bluetooth Device
Pair with a Bluetooth device Press and hold the Bluetooth button for 2 seconds. The indicator light flashes blue when in pairing mode. On your device, enable Bluetooth and select PLT P7200 from the list of devices. When the devices are paired successfully, the speakerphone will play a tone and the indicator light will turn solid blue, momentarily. -
Page 7: Charge
Charge Charging the speakerphone can take 3 to 6 hours, depending on the battery level and charging method. Do one of the following: Connect the micro USB cable from the USB port on the speakerphone to the USB port on your computer. -
Page 8: Switch Between Paired Devices
Switch between paired devices The speakerphone can pair up to 10 devices and connect with up to two devices. However, the speakerphone can only transmit audio for one device at a time. To switch between devices, do one of the following: Turn off Bluetooth on one of the connected devices. -
Page 9: Clear Stored Bluetooth Devices
Clear stored Bluetooth devices The speakerphone can remember up to 10 paired devices. Clear the Bluetooth cache to remove any data from your device stored on the speakerphone. Press and hold the Bluetooth and volume down (-) buttons for five seconds. An audio tone plays and the indicator light flashes blue. -
Page 10: Indicator Lights Explained
Indicator lights explained Indicator Status Amber Charging battery Blinking amber Low battery Pulsing amber Software update Blue Bluetooth paired Blinking blue Pair/discovery mode Green In a call Blinking green Incoming call Mics muted White Power on... -
Page 11: Security Cable
Security cable... -
Page 12: Support
Santa Cruz, CA 95060 2132 LR Hoofddorp United States Netherlands © 2018 Plantronics, Inc. Bluetooth is a registered trademark of Bluetooth SIG, Inc. and any use by Plantronics, Inc. is under license. All trademarks are the property of their respective owners. 212267-06 (03.18)