Table of Contents
Advertisement
SHEAR BOLT
The beater and apron drive are protected by one shear bolt. Two
extra shear bolts are provided. Shearing of the bolt is normally
due to foreign objects in the manure or starting the spreader PTO
too quickly with high tractor RPMs. Always use H&S shear bolts.
WHEEL HUBS
To service or adjust the wheel hubs, tighten the castellated
nut on the spindle to the point where there is no end-play
and a slight drag on the bearings. Replace the cotter key
with a new one of the correct size.
TIRES & WHEELS
Check the tire pressure after every 50 hours of operation. Tires should be inflated to the appropriate
pressure listed in the table.
Tire
10.00x15
IF240/80R15
Wheel lug torque should be checked after every 50 hours of operation and tightened to the appropriate
torque.
Wheel bolts must be tightened between 60-65 ft./lbs. of torque.
SERVICE
Pressure
40 PSI
46 PSI
-20-
Shear
Bolt
Shields Removed For Clarity
Advertisement
Table of Contents
