Genelec 4410A Operating Manual page 14

INPUT / CROSSOVER SECTION
Ethernet connection
Nominal SPL with 0 dBFS digital audio input at
maximum sensitivity
Audio-over-IP streaming formats
Crossover frequency, bass/treble
Number of user-adjustable filters
User selectable filters, choice of function for each
user-adjustable filter
User selectable filters, parameter adjustment
ranges for a notch filter
•
gain
•
Q-value
center frequency
Sensitivity, adjustment range
Delay, adjustment range
AMPLIFIER SECTION
Bass amplifier output power, short-term
Treble amplifier output power, short-term
Supply power at switch, power-over-Ethernet
PoE+ (Class 4)
PoE (Class 3)
Supported PoE standards
PoE+ (supports signature and LLDP)
PoE (supports signature)
CAT cable specification
Maximum CAT cable length
Power consumption in idle
Power consumption in ISS standby mode
13
100BASE-TX
1 x RJ45
130 dB SPL
AES67, ST2110-30, Dante
2.9 kHz
20
parametric notch
high frq. shelve
low frq. shelve
bass roll-off
bass tilt
treble tilt
-20...+2 dB
0.1...20
10 Hz...16 kHz
-60...0 dB
0...98 ms
18 W
18 W
30 W
15.4 W
IEEE 802.3at
IEEE 802.3af
5, 5e, 6
100 m (333 ft)
4 W
3 W