Advertisement
AUTOLK –Automatic
24
Keypad Lock
SFT-D – Frequency
25
Offset Direction
OFFSET -Frequency
26
shift amount
MEM-CH - Store a
27
Memory Channel
DEL-CH - Delete a
28
memory channel
WT-LED- Standby
29
Backlight
RX-LED- Receive
30
Backlight
TX-LED- Transmit
31
Backlight
32
AL-MOD - Alarm Mode
TDR-AB - Transmit
34
selection while in Dual
OFF
MENU+24
*When ON, the keypad will be locked if not used in 8 seconds.
Pressing the [#
OFF: TX = RX (simplex)
MENU+25
+: TX will be shifted higher in frequency than RX
- : TX will be shifted lower in frequency than RX
00.000...69.990
MENU+26
*Specifies the difference between the TX and RX frequencies
000...127
*This menu is used to either create new or modify existing channels
MENU+27
(0 through 127) so that they can be accessed from
MR/Channel Mode
000...127
*This menu is used to delete the programmed information from the
MENU+28
specified channel (0 through 127) so that it can either be programmed
again or be left empty.
MENU+29
OFF/ BLUE/ ORANGE/ PURPLE
MENU+30
OFF/ BLUE/ ORANGE/ PURPLE
MENU+31
OFF/ BLUE/ ORANGE/ PURPLE
SITE: Sounds alarm through your radio speaker only
MENU+32
TONE: Sending alarm tone
CODE: Sending alarm code
OFF
MENU+34
A band transmit (Upper row frequency)
28
] key for 2 seconds will unlock the keypad.
ON
Advertisement
Chapters
