Radioddity GT-82 User Manual page 21

TX CTCSS tone 123.0
a. Change from Menu to Menu by pressing the [EXIT/AB] key.
b. Turn off the radio, then press and hold the [MENU] key to turn on the radio and set it to VFO mode.
Channel number at the right will disappear.
c. [MENU] [2][8] [MENU] [1] [0] [MENU] [EXIT/AB]
d. [MENU] [1][3] [MENU] 123.0 [MENU] [EXIT/AB]
e. Enter RX frequency (Ex. 432000)
f. [MENU] [2][7] [MENU] [1][0] [MENU]
-->>[EXIT/AB]
g. Enter TX frequency (Ex. 437000)
h. [MENU] [2][7] [MENU] [1][0] [MENU]
-->> [EXIT/AB]
i. Turn off the radio, then press and hold the [MENU] key to turn on the radio and set it to MR Mode. Channel number will
re-appear.
Ex 2. Programming a Simplex Channel with CTCSS tone
EXAMPLE New memory in Channel 10:
RX = 436.000 MHz
TX CTCSS tone 123.0
a. Change from Menu to Menu by pressing the [EXIT/AB] bu�on.
b. Turn off the radio, then press and hold the [MENU] key to turn on the radio and set it to VFO mode.
Channel number at the right will disappear.
c. [MENU] [2][8] [MENU] [1] [0] [MENU] [EXIT/AB]
d. [MENU] [1][3] [MENU] 123.0 [MENU] [EXIT/AB]
-->>Use [EXIT/AB] to select Upper display
e. Enter RX frequency (Ex. 436000)
f. [MENU] [2][7] [MENU] [1][0] [MENU]
-->> [EXIT/AB]
g. Turn off the radio, then press and hold the [MENU] key to turn on the radio and set it to MR Mode. Channel number will
re-appear.
Deletes Prior Data in channel (Ex. 10)
Selects desired TX encode tone
Enter the desired channel (Ex 10)
RX has been added
Enter the same channel (Ex 10)
TX has been added
Deletes Prior Data in channel (Ex. 10)
Select desired TX encode tone (Ex 123 CTCSS)
Enter the desired channel (Ex 10)
Channel has been added
19