Table of Contents
Advertisement
Remote operation
Locking the dimmer switch
• The dimmer can be 'locked' so that the manual buttons will not operate it.
This can be achieved using the LightwaveRF App or a 'Socket Locker'
remote. If it is locked on, then the dimmer will not turn o
locked o , it will be possible to turn the dimmer on, but it will automatically
turn o
again after five minutes. A locked dimmer is signified by a slow
flashing amber LED.
• To lock/unlock the dimmer, press the 'unlock' button on the Smartphone
App or Socket Locker. If the Socket locker is misplaced, the dimmers can be
reset by turning of mains power to the circuit for a period of 30 seconds.
Understanding flashing LED sequences on the dimmer
Flashing blue & amber alternately: Socket in Linking Mode
Quickly flashing blue: Socket successfully linked
Quickly flashing amber: Socket unlinked / memory cleared
Slowly flashing amber: Socket memory full / socket locked
Blue & flashing amber: Socket successfully locked / unlocked
manually. If it is
Advertisement
Table of Contents
