Brother MFC-J2330DW Online User's Manual page 718

[Settings] > [All Settings] > [General Setup]
Level 1 Level 2
Maintenance Improve Print
Quality
Print Head
Cleaning
Remove Paper
Scraps
Ink Volume
Ink Cartridge
Model
Print Setting
Options
Tray Setting Tray #1
Tray #2
MP Tray
Tray Setting:
Copy
Tray Setting: Fax
Tray Setting:
Print
Tray Setting:
JPEG Print
(Media)
Check Paper
Quiet Mode -
Volume Ring
Beep
Speaker
LCD Settings Backlight
Dim Timer
Screen Settings Home Screen
Copy Screen
Level 3 Descriptions
- Check and correct the print quality, alignment and
paper feeding according to the LCD instructions.
- Clean the print head according to the LCD
instructions.
- Remove a piece of paper in the machine according
to the LCD instructions.
- Check the available ink volume.
- Check your ink cartridge numbers.
Reduce
Reduce smudging on the paper or paper jams
Smudging during printing.
Reduce Reduce uneven lines on the paper during printing.
Uneven Lines
Slow Drying Use this setting when printing with a type of plain
Paper paper on which the ink dries very slowly.
Paper Type Set the type of paper in paper tray #1.
Paper Size Set the size of paper in paper tray #1.
Paper Size Set the size of paper in paper tray #2.
Paper Type Set the type of paper in the MP tray.
Paper Size Set the size of paper in the MP tray.
Tray Use Select the tray to be used for copying.
Tray
Change the tray priority for copying.
Priority
Tray Use Select the tray to be used for faxing.
Tray Change the tray priority for faxing.
Priority
Tray Change the tray priority for printing from your
Priority computer.
Tray Use Select the tray to be used for printing photos from a
USB flash drive.
Tray Change the tray priority for printing photos from a
Priority USB flash drive.
- Check the paper type and paper size when you pull
the tray out of the machine or set the paper in MP
tray.
- Decrease printing noise.
- Adjust the ring volume.
- Adjust the beeper volume.
- Adjust the speaker volume.
- Adjust the brightness of the LCD backlight.
- Set how long the LCD backlight stays on after the
last finger press.
- Set the screen that is displayed when you press
(Home).
- Set the default Copy screen settings.
711