Brother MFC-J2330DW Online User's Manual page 707

Level 1 Level 2
Message from Status
Brother
Web Connect Proxy
Settings Settings
Network I/F -
Network Reset -
[Settings] > [All Settings] > [Print Reports]
Level 1
XMIT Verify
Address Book
Fax Journal
User Settings
Network Configuration Print a list of your Network settings.
WLAN Report
Caller ID History
[Settings] > [All Settings] > [Machine Info.]
Level 1
Serial No.
Firmware Version
Firmware Update
Firmware Auto Check -
[Settings] > [All Settings] > [Initial Setup]
Level 1
Date & Time
Station ID
Tone/Pulse
(Available only for some
countries.)
Level 3
-
Proxy
Connection
Address
Port
User Name
Password
-
-
Descriptions
Print a Transmission Verification Report for your last transmission.
Print a list of names and numbers stored in the Address Book.
Print a list of information about your last 200 incoming and outgoing faxes.
(TX means Transmit. RX means Receive.)
Print a list of your settings.
Print the wireless LAN connection results.
Print a list of the available Caller ID information about the last 30 received faxes and
telephone calls.
Level 2 Descriptions
- Check your machine's serial number.
Main Version Check your machine's firmware version.
- Update your machine to the latest firmware.
View firmware information on the Home screen.
Level 2 Descriptions
Date Add the date and time on the screen and in the headings of the
faxes you send.
Time
Time Zone Set your time zone.
Fax Enter your name and fax number so it appears on each page you
fax.
Name
- Select the dialling mode.
Level 4 Descriptions
- Display messages and
notifications from Brother.
- Change the Web connection
settings.
-
-
-
-
- Select the network connection
type.
- Restore all network settings
back to the factory settings.
700