O P E R A T I O N T E M P E R A T U R E
& T I M E R C O N T R O L
Solid State Controller
This controller has three control features:
1. T emperature – May be set from
100°F-425°F (38°-163°C) Factory default is
200ºF.
2. T ime – Time may be set from 1 second to
10 minutes.
3. C ounter – Cycle counter counts the
number of applications from 1 to 9999 (see
additional Notes – Counter).
4. 2 Lower (Fig. A) Refers to models using
upper and lower heated surfaces.
Controller Operation
1. V iewing the Modes of Operation :
To view the set points of temperature, timer
and counter, press MODE button to view the
desired mode of operation.
2. C hanging Temperature:
Press MODE button until temperature is
displayed.
Press and hold SET button while
pressing the UP (↑) and DOWN (↓)
arrow buttons to desired
temperature setting.
Fahrenheit/Celsius Conversion :
The temperature controller can be
programmed to display either ºF or ºC. Press
the MODE button until the temperature is
displayed . Then push a hold the SET button
for 10 seconds.
FIG. A
3. C hanging Time:
Press MODE button until time is displayed.
Press and hold SET button while
pressing the UP (↑) and DOWN (↓)
arrow buttons to desired timer
setting.